What Types of Exit Devices Can Be Installed?
ASAP Locksmith can assess the door and discuss hardware styles that fit the opening and intended use. Common configurations include several familiar options.
Rim Exit Devices
A rim device mounts on the surface of the door. The latch secures into a strike mounted on the frame. This is often used on single exterior doors, especially hollow metal doors and aluminum storefront doors.
Mortise Exit Devices
A mortise device has a lock body fitted into a pocket in the door. These may appear on higher-use commercial openings or doors where a particular lock function is needed.
Vertical Rod Exit Devices
Vertical rod hardware uses latches that secure at the top and bottom of the door. It is often used on pairs of doors. Some setups use surface vertical rods, while concealed rods are placed inside the door.
Alarmed Exit Devices
An alarmed panic bar can sound when someone opens the door without authorization. This can be useful for a rear employee exit, stockroom door, or side exit where access needs to be monitored.
Electrified Exit Devices
Electrified panic hardware can work with controlled access systems. Employees may use a credential, keypad, or other authorized entry method from the outside, while occupants can still use the push bar from inside to exit.
The hardware choice depends on how the door is used each day. A busy receiving door has different needs than an office side door that opens a few times a week.
What Happens During Exit Device Installation?
Exit device installation is more than mounting a bar across the door. The parts need to line up and move correctly together.
A typical Alvin exit device service visit may include these steps.
- Reviewing the door and frame condition
We check the door material, swing direction, existing holes, hinges, frame alignment, and latch area.
- Looking at the existing hardware
If there is old panic hardware, a deadbolt, a closer, or access equipment, we look at how those parts interact.
- Confirming the exit function
The inside must allow the intended exit action. Exterior entry needs are discussed separately.
- Preparing the door and frame
This may involve fitting the device, positioning a strike, adjusting rod assemblies, or working around prior hardware holes.
- Installing and setting the hardware
The panic device, latch components, trim, strike, and related pieces are fitted to the opening.
- Checking door movement
The door needs to close, latch, and release without unnecessary binding. A closer or hinge issue can affect this step.
- Reviewing use with the property contact
We show the contact person how the exit device operates and point out any door condition that may need attention.
A well-used exit door often reveals its quirks quickly. “It only sticks when it rains” is something building managers around Alvin have said more than once. Weather, settling, and daily use can all show up at the latch.