Can existing commercial locks be rekeyed
Many commercial locks can be rekeyed, though the answer depends on the lock type, its condition, and whether compatible keying parts are available. Cylindrical lever locks, deadbolts, mortise cylinders, rim cylinders, and many storefront lock cylinders may be candidates for rekeying.
During a visit, ASAP Locksmith can inspect items like
- Whether the lock is operating smoothly
- Whether the cylinder can be removed and serviced
- Whether the hardware is damaged or worn
- Whether prior keying work was done correctly
- Whether multiple doors use compatible keyways
- Whether a master key setup is already in place
- Whether the door alignment is affecting lock operation
Not every problem comes from the key cylinder. A steel back door that has sagged a little may place pressure on a latch. A storefront door near a busy parking lot may have an issue with its closer or alignment. Rekeying changes access control inside the lock, while mechanical door problems may need separate attention.
What is the difference between rekeying and replacing a commercial lock
Rekeying changes the internal key pattern. Replacing changes the lock hardware itself.
Rekeying may make sense when the lock body is in workable condition and the main concern is old keys. Replacement may be considered if the hardware is broken, heavily worn, incompatible with the door, or no longer matches the business’s access needs.
Here is a simple way to look at it
- Rekeying changes which keys work
- Replacement changes the physical hardware
- Repair addresses a mechanical issue
- Master key work organizes access across several doors
A property manager with several units off FM 1462 might rekey exterior doors after tenant turnover while keeping the same compatible commercial hardware. A business with a failed lever handle or damaged lock body may need a different conversation. There is no need to fix what is not broken, but a stubborn lock should not be ignored either. That is how a simple key issue can become Monday morning’s unwanted surprise.