What Happens During a Crash Bar Installation Visit?
Every door needs to be checked before hardware is selected or installed. Door material, handing, swing direction, existing locks, and traffic patterns matter.
A typical crash bar installation visit may include
- Reviewing the door and frame condition
- Checking whether the door swings in the proper exit direction
- Looking at hinges, closers, latch alignment, and strike placement
- Identifying the type of exit device that fits the opening
- Removing old or damaged hardware when needed
- Mounting the panic bar and related latch hardware
- Adjusting the door so it opens and closes properly
- Testing the push bar, latch action, closer, and re-entry function
Some doors require more than a basic rim-style panic bar. Double doors, aluminum storefront doors, and doors with glass panels may need different hardware choices. A fire-rated opening may also have specific hardware requirements that need careful attention.
Which Types of Panic Bars Can Be Installed?
Crash bar hardware comes in several forms. The right choice depends on the door construction and how the doorway is used.
Rim Exit Devices
Rim exit devices mount on the inside face of the door. They are common on single exterior doors with a latch that connects to a strike on the frame. Many retail and office exits in Angleton use this setup.
Vertical Rod Exit Devices
Vertical rod hardware uses rods that secure at the top and bottom of the opening. This option is often used on pairs of doors. Concealed rod systems hide much of the hardware inside the door, while surface vertical rod systems remain visible.
Mortise Exit Devices
Mortise exit devices use a latch built into a pocket cut within the door edge. These can be found on certain commercial doors and may be used where a more integrated lock setup is needed.
Alarmed Exit Bars
An alarmed crash bar can sound when someone opens a protected exit. This may fit a stockroom exit, restricted hallway door, or door that needs to remain available for emergency egress but monitored during normal activity.
Electrified Exit Hardware
Some properties use exit hardware with access control systems features. Staff may enter with a credential, keypad, or other approved method while people inside can still exit by pushing the bar. This setup is common in offices, clinics, schools, and controlled-access commercial spaces.